Inoclic Single-Use Inoculation Rods for Inoculum Standardization (AST), Short 86 mm / Long 156 mm, Packs of 250
Vendor: i2a
SKU: 40001
In stock
Inoclic - single-use inoculation rod for the standardization of the bacterial inoculum in antibiotic susceptibility testing (Kirby Bauer Method). Its use is simple and fast, and allows for the inoculation on agar culture media or in tube storage media, as well as suspension of bacteria in liquid media. It can also be used to prepare identification plates for mass spectrometry.
INOCLIC® is directly inspired by this principle, keeping the simplicity of the process, and eliminating defects. INOCLIC® is recommended for all traditional uses of platinum wire such as inoculation of agar culture media or preservation media in tubes by deep central puncture, or the suspension of bacteria in liquid media. INOCLIC® is particularly suitable for the pr oduction of standardised bacterial inocula for antibiotic susceptibility testing. INOCLIC® rods are disposable and are disposed of after use. They can be used directly by hand.
Inoclic is supplied as short rods (86 mm) or long rods (156 mm) in packs of 250; the 5,000- and 10,000-rod boxes are 20 and 40 packs of 250.
How it works
- Hold an Inoclic between two fingers by the end you will not use, vertically (90°) to the agar surface.
- Pick 3 to 5 colonies: pass through the first colony and the agar down to the bottom of the dish, then touch the surface of the following colonies.
- Put the collected colonies in suspension in a tube of water adapted to the technique (SIRscan Tubes, 0.7 ml): incline the tube, place the end of the rod on the moist side and release the colonies with an up-and-down and rotating movement.
- Close and vortex the tube, dip a sterile SIRscan Swab, wring it against the tube wall and swab the whole agar surface in three directions.
Specifications
| Product | Inoclic single-use inoculation rods |
| Rod lengths | Short 86 mm / Long 156 mm |
| Pack | 250 rods; boxes of 20 x 250 (5,000) and 40 x 250 (10,000) |
| Uses | Inoculum preparation for AST (Kirby-Bauer), inoculation of agar media and tube storage media, suspension in liquid media, MALDI-TOF identification plates |
| Performance | Method comparison with the EUCAST reference inoculum procedure: 97.8% concordance (expected > 90%), 2.2% discrepancies (expected < 3%); reproducibility 98.7%. |
| Storage | Store in the original packaging, in a dry place and at room temperature. |
| Complements | SIRscan Tubes (0.7 ml physiological water), SIRscan Swabs, EUCAST/CLSI kit (500 Inoclics + 500 swabs + 500 tubes) |
| Manufacturer | i2a (Montpellier, France) |
| Regulatory status | CE-marked in vitro diagnostic medical device (IVDR declaration CE-710693) |
Storage and handling
Store in the original packaging, in a dry place and at room temperature.
- Do not handle the rods by the side intended for picking colonies.
- Do not flame-sterilise the rods before use.
- Not recommended for colonies with a diameter smaller than or equal to the rod itself, nor for abnormally mucous colonies.
Ordering
| Code | Price-list description | Rods / Pack |
|---|---|---|
| 40001 | INOCLIC® - Short rods Inoculator - 86 mm rods Pack: 250 | Short rods (86 mm), 250 rods |
| 40004 | INOCLIC® - Long rods Inoculator - 156 mm rods Pack: 250 | Long rods (156 mm), 250 rods |
| 40011 | Inoclic (Short) Package: 20 x 250 Rods BOX/5000 | Short rods (86 mm), 5,000 rods (20 x 250) |
| 40010 | Inoclic (Long) Package: 20 x 250 Rods BOX/5000 | Long rods (156 mm), 5,000 rods (20 x 250) |
| 40013 | Inoclic (Short) Package: 40 x 250 Rods BOX/10000 | Short rods (86 mm), 10,000 rods (40 x 250) |
| 40012 | Inoclic (Long) Package: 40 x 250 Rods BOX/10000 | Long rods (156 mm), 10,000 rods (40 x 250) |
Documents
- Inoclic instructions for use (IFU-0341, PDF)
- EU declaration of conformity IVDR, Inoclic (CE-710693, PDF)
- Study: Inoclic - Pathology in Practice, Vol 18 issue 3 (2017)
- Study: Inoclic ring trial - Pathology in Practice (2019)
- Study: Inoclic poster - Microbe, Sheffield UK (2016)
- Study: Inoculum standardization device and fast susceptibility testing medium - ASM (2012)
- Inoclic product page (i2a-diagnostics.fr)
Specifications
- Applications Inoculum standardization for AST; inoculation of agar and tube media; MALDI-TOF target preparation
- Compatible with SIRscan Tubes, SIRscan Swabs, MHR-SIR media
- Country of origin France
- Format Disposable rods, 86 mm or 156 mm
- Method Inoculum preparation for agar disc diffusion AST
- Pack size 250 / 5,000 / 10,000 rods
- Regulations CE IVD (IVDR)
- Storage conditions Room temperature, dry, original packaging
- Sub category Inoculum Standardization
- Technology Single-use inoculation rod (straight-wire principle)
links and documants
- Ifu url Click here
- Source url Click here
Couldn't load pickup availability
Inoclic Single-Use Inoculation Rods for Inoculum Standardization (AST), Short 86 mm / Long 156 mm, Packs of 250
Quick order list
Free shipping on almost everything
Free Shipping
All orders over $500 are delivered to your doorstep at no extra charge.
30-Days Free Returns
Enjoy the freedom of stress-free shopping with our hassle-free and return policy.
Secure Payment
Shop with confidence knowing your payments are secure and your information

